How To Paint A Guitar Body With Spray Cans

I Know Most Of You Are Probably Going To Snap At Me And Tell Me That I Need To.

Lacquers cure up hard, but they take forever. Wait for each coat to fully dry before moving on to the main design. Spray gun (if you decide to use spray cans) clear colour coats;

Lighty Spray On Krylon Matt Grey Or White Or Which Ever Color You Want To Use For Primer, Your Not Going To Cover The Entire Body, Just A Light Spray, Let It Dry For A Day Repeat That Process For 4 Days, By The Forth Day You'll Have A Good 4 Coats Of Primer.

For example, butterscotch is loaded as a light load not to decrease cost but to prevent too heavy of a first application and to reduce the chance of stripes in the finish. As an amazon associate i earn from qualifying purchases. As always, if you’re doing a custom paint job on something important you should know that spray cans are really not the best option.

I Had Wrecked A Guitar (Neck And Body Seperated) And Needed To Do A Total Strip And Refinish.

I do custom painting projects, guitar painting, airbrushing, spray can painting, wood working, and a variety of. Colortone tinted aerosol guitar lacquer: So i thought i would put something together in this blog to show you how to spray your electric guitar with spray cans.

I Left The Paint To Dry Off For About 3 Hours ( Feels A Little Bit Like 240G Sandpaper By This Stage).

It begins by painting the whole guitar with one color of flat paint, and then creating a panel where you want the picture, out of tape. Next lay your picture on top of the tape and use a scalpel or razor to cut out the design as a template carefully ensuring you do not cut the guitar, only the image and the tape. Spray the primer over the guitar, do a few coats, letting each one dry.

I Got A Guitar In A Lot That Someone Had Painted With A Brush, And They Left Globs Of Paint In The Bridge Cavity.

I have tried to put other flakes into our custom spray cans but the flakes. In this video teddy zane shows you how to paint a guitar with spray paint. I used to use it to paint the chassis & axle parts for the roller coasters where i worked back in the day.