How To Build A Plywood Drawer Box

But Based On Your Skill Level.

Then i cut all my drawer box pieces to length from these strips on the miter saw to make 6 identical drawer boxes like this. With the drawer sticking out only a few inches, extend the slide to the edge of the drawer box and attach with the included screws. Glue and nail a 鈥?plywood base cut to size of the drawer box.

Drawer Box Side Thickness Should Be At Least 1/2″ But If You Can Find 5/8″ Plywood Your Boxes Will Be Stronger.

See the section above about determining the sizes you need. If you’re using 1/2″ plywood, use 1″ kreg screws. A seasoned woodworker may not take either approach, as they can easily conceptualize how everything will fit together.

Check Out This Post On How I Build Drawer Boxes!.

We’ll assemble the drawer box using wood glue and kreg screws. Use simple equations to determine the size of the drawer, and build it using common materials. This is because plywood is flat, strong, and dimensionally stable (it expands and contracts much less than solid wood).

Attach The Drawer Slides To The Drawer Box And The Cabinet Frame.

Then place a 1/4″ shim along the bottom of the opening and set the drawer on it. Once the drawer is painted or stained, i like to run a small bead of clear caulk along the edges of the plywood base to keep dust from falling between the plywood and the 1x3s. Here’s how i build easy diy drawer boxes with dimensional lumber.

Build The Drawer Box Using Wood Glue And 1 ¼” Pocket Hole Screws Keeping All The Sides Square.

Cut the pieces needed for the sides and bottom of your boxes. Because the bottom of the drawer will fasten directly to the frame, the total height of the front, back, and sides should be the drawer slot height minus the depth of your drawer bottom. Build modern dresser drawer boxes.