Color Hardener Stamped Concrete. Masters colour hardener is a dry shake coloured surface hardener, ready to use. Concrete for a successful color hardener job must strike a fine balance:
Stamped concrete with color hardener. YouTube from
Too much air entrainment can prevent moisture from reaching the surface, but concrete with no air entrainment might have excessive bleed water. The addition of a color hardener to concrete can be accomplished in two ways. Since the coating is 1/8″ thick, it will be very durable and the color will survive most chips and dings.
Of Coverage For Dark Colors And 80 Sq.
Apply color hardenerafter the concrete reaches the right stage of plasticity (generally when no bleedwater is on the surface), broadcast the color hardener by throwing it onto the surface from waist level or a bit lower to minimize the amount of material that drifts into the air. Work from the middle of the slab and back toward the edge forms to avoid a heavy buildup of color hardener on the. A base color and an accent color.
Stamped Or Ornamental Concrete Is Normally Tinted By Two Techniques, Either By The Use Of Integral Coloring Procedure Or By Using A Color Hardener.
It is typically used to provide the base color for stamped concrete. Integral color and color hardener. Too much air entrainment can prevent moisture from reaching the surface, but concrete with no air entrainment might have excessive bleed water.
Integral Color Is Mixed Into The Concrete In The Truck.
As surface hardens, apply sandstone release agent to the interior panels (within the bands), then apply matte stamps. When properly applied and troweled into newly placed, fresh concrete, it forms a colored concrete surface that is resistant to weathering, wear and normal abrasion. Brickform color hardener is designed to work with imprinting tools to produce clear, sharp impressions that enhance the finished appearance of any hardscape.
Concrete For A Successful Color Hardener Job Must Strike A Fine Balance:
There are four options contractors typically use to color stamped concrete. Lithochrome® color hardener will not migrate from standing water, and can safely color concrete fountains, pools, water features, or concrete that will be polished and encounter damp or wet environments. It is used for two reasons:
For Stamped Concrete, Kingdom Products’ Antique Release Agent Is Recommended To
Use a power washer to remove release agent. While both are good methods of coloring concrete, color hardener provides greater color selection and enhances the strength and durability of the concrete surface. The addition of a color hardener to concrete can be accomplished in two ways.
