Fisher And Paykel Dishdrawer Error Codes

Are You Sure The Code Is F52?

Flood switch has been activated. Fisher and paykel dishdrawer dishwasher fault codes. This usually happens because something was stacked too high in one of the drawers when it was running and this caused the lid to not seal up when the drawer was shut.

The Engineering Is Elegant In Its Simplicity.

The door is not properly closed. After that, press the “power” button, which will turn off the dishwasher. I probably wont be back to this until weekeend.

If Fisher & Paykel Dishdrawer Dishwasher Beeps 3 Times, Or Beeping Continuously, It Indicates Occurrence Of A Fault, And In Most Cases, It Should Display A Fault Code In That Scenario.

Or contact your local fisher & paykel dealer. I will call fisher and paykel today and ask them to email it as there isn't anything there. F1 on fisher & paykel dishwashers.f1 means that there is water in the base pan below the bottom drawer.

Now, Unplug The Dishwasher From The Socket.

No programme has been selected. How to reset a smart drive fisher & paykel 608i had the opportunity to work on a fisher & paykel dd602 dishdrawer a couple days ago. If the fault persists, note down the code before disconnecting the dishwasher from the water and power supplies and contact customer care.

If It Is A Lid Fault It Might Come Good By Turning Off The Powerpoint Switch And Turning It On Again After Ten Seconds Or So.

The module has an internal fault. We have added some notes to try to assist you in determining the nature of the fault. E1 , e2 , e3 , e4 , e5 , e6.